We’re an affiliate
We hope you love the products featured in our articles. Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!
To have a weak toilet flush can be more than just inconvenient, it can cause serious damage to your plumbing and put strain on your wallet.
Are you struggling with multiple unexpected, costly plumbing bills? A weak toilet flush could be the cause. With that in mind, we’ve gathered some of our favourite tips and tricks for fixing this common problem quickly and efficiently.
Why Is My Toilet Having A Weak Flush?
The most likely explanation for your weak toilet flush is a clogged or blocked flapper. The toilet flapper is the small circular part inside the bowl of the toilet that opens to allow water to flow from the tank into the bowl during a flush.
When this flapper becomes clogged, it won’t open as wide as it should, which will reduce the amount of water entering the bowl and thus cause a weak flush.
6 Ways To Make Your Toilet Flush Stronger
A weak flush is one of the most annoying problems you can encounter in your bathroom. A clogged or blocked toilet can be difficult to unclog and frustrating if it continues to keep happening.
That’s why we’ve compiled 6 different ways that you can make your toilet flush stronger and more reliable than ever before.
Inspect The Fill Valve
Check to make sure the fill valve is securely fastened in place and not loose or damaged. If it is, replace it with a new one.
Fill vales are responsible for controlling how much water enters the tank. If it’s not working properly, it won’t provide enough water to produce a full flush.
- Fix noisy, or slow filling fill valves with the quietest, most powerful toilet fill valve available
Clean The Flapper
Make sure the flapper – the rubber seal that covers your toilet tank outlet – is clean and free of debris. If it’s not, clean or replace.
Flapper’s are prone to getting clogged up with things like dirt, debris or even a build up of limescale. This can interfere their ability to open fully and to weak flushes.
- LONG-LASTING DURABILITY: Toilet flapper with solid frame replaces leaky, corroded flappers,…
Check The Chain
Take a look at the chain that connects the flapper to the flush handle and check is tight & secure. If it’s loose, tighten or replace it as needed.
Flapper chain’s can become loose over time and cause the flapper to open partially or not at all which can lead to weak flushes.
Adjust Water Level
Verify your toilet’s tank isn’t overfilling. If it is, lower the float arm so more water can escape during each flush.
The float arm is what sets the water level in your toilet tank. If it’s set too high, it will prevent some of the water from escaping and this causes a weak flush.
Clean Out The Bowl
Make sure there’s nothing blocking the drain in your toilet bowl, like a clog or debris, which could be causing a weak flush.
Clogged toilet bowls are a common cause of weak flushes & can be easily cleared with a plunger or by using chemical cleaners.
Replace The Wax Ring
Check if the wax ring that connects your toilet bowl to the drain pipe is worn out or damaged. If it is, replace it with a new one.
Wax rings can become worn & brittle over time and this can prevent the toilet bowl from sealing properly. This means water won’t move as easily, causing a weak flush.
- 100% pure petroleum wax gasket for setting any floor type closet bowl
A weak toilet flush can be easily fixed with these simple steps. Whether you’re looking to save money on future plumbing bills or just want your flushing back up and running as soon as possible, these tips will help you get the job done quickly and efficiently.
If our tips do not solve your problem, it may be wise to call in a professional. A plumbing specialist will be able to diagnose and treat the problem more accurately.
Weak Toilet Flush Frequently Asked Questions
How do you fix a super slow toilet flush?
Clear out your slow flush with a simple solution of baking soda and boiling water. Begin by pouring half a cup of baking soda into the drain, then finish off with a pot of boiling water. After letting it settle for up to two hours, test run the toilet by flushing. Don’t worry if it takes a few tries – this easy hack is a proven remedy for unclogging your toilet in no time.
How do you fix a toilet that needs to be flushed twice?
Fix your double-flushing toilet in no time by adjusting your toilet flapper. When your toilet is flushing more than once, it means the flapper is staying open for too long, causing an excessive amount of water flow. Luckily, if you have an adjustable flapper, you can easily solve this issue by adjusting it to close faster.
Why does my toilet flush a few times then back up?
Toilet clogs are often caused by plumbing blockages, particularly if only one toilet is exhibiting issues while other drains in the house seem to work fine. In such cases, a local clog is to blame. Alternatively, a blocked or damaged sewer line could be the underlying issue.
Final Thoughts
A weak toilet flush can be a nuisance, but fortunately it’s usually an easy fix. In most cases, the issue stems from the toilet flapper being clogged up with debris or not opening fully due to a loose chain.
Making sure your toilet’s water level is correct and cleaning out the bowl of any clogs will also help to improve the flush.
If all else fails, it may be time for a professional plumbing checkup to identify any potential issues. Regardless of your situation, following our tips can help to restore your toilet’s flushing power.
Related Articles
How To Fix A Low Water Level In Your Toilet Bowl?
How To Easily Remove A Bemis Toilet Seat?
Toilet Fills Up With Water Then Drains Slowly?